• Home
• Tooling-Gaging-Equipment
• Generals Product List
• Nova Products and Services
• About Us
• Contact Us

ACCESSORIES

SERVO Products Puts The Industry Standard Power Feed To Work For You
• Smoother Cuts
• Longer Tool Life
• Increased Productivity
• Available for table, cross, or knee feeds

Get a smoother surface finish, higher accuracy and better repeatability. Reduce operator fatigue and increase your productivity, while you increase tool life. With SERVO Products' electronically controlled power feeds.


Now, your class 1 manual mill can deliver semi-automated machining with superior speed regulation, ramping and dynamic braking. Plus Servo Products' power feeds feature an integral safety clutch and circuit breaker for overload protection.

Type 140 - Knee, Table, and Cross Feeds

• Semi-automated machining on Class 1 mills to 3 hp.
• Peak torque (half-wave series motor): to 140 in-lb / 15.8 N×m torque
• Intermittent torque: 105 in-lb / 11.9 N×m
• Continuous torque: 90 in-lb / 10.2 N×m
• Variable feed rate: .75-25 ipm / 19-635 mm/min. (table and cross); 0-12 ipm / 0-305 mm/min. (knee).
• Rapid traverse: 35 ipm / 889 mm/min. (table and cross); 12 ipm / 305 mm/min. (knee).
• Gear reduction ratio (motor to screw shaft): 72:1.
• Helical gearing and torque limiting friction safety clutch.
• Electrical: 110V, 50/60 Hz, 2.5 Amps.
• Approximate weight: 15 lb. / 6.8 kg.

Type 150 - Table and Cross Feeds

• Semi-automated machining on Class 1 mills to 3 hp
• Peak torque (full-wave SCR control compound DC motor): to 150 in-lb / 17 N×m torque
• Intermittent torque: 120 in-lb / 13.6 N×m
• Continuous torque: 100 in-lb / 11.3 N×m
• Variable feed rate: .50-35 ipm / 13-889 mm/min.
• Rapid traverse: 35 ipm / 889 mm/min.
• Gear reduction ratio (motor to screw shaft): 72:1
• Smooth surface finish at speeds as low as 0.5 ipm or 13 mm/min. at full torque.
• Superior speed regulation, ramping, dynamic breaking, friction safety clutch and limiting circuit protection.
• Helical gearing and torque limiting friction safety clutch.
• Electrical: 110V, 50/60 Hz, 3 Amps.
• Approximate weight: 15 lb. / 6.8 kg.

Servo Turbo Drive - Knee, Table, and Cross Feeds

• Electronic limits with no external switches to mount.
• Low maintenance brushless DC variable reluctance (VR) motor.
• Digital closed-loop control design uses a capacitive encoder and ASIC-controlled IGBT amplifier.
• Peak torque: 200 in-lb / 22.6 N×m
• Intermittent torque: 150 in-lb / 17 N×m
• Continuous torque: 100 in-lb / 11.3 N×m
• Lift heavy knees such as the Bridgeport Series II or Lagun Deluxe. Over temperature detection protects the unit in overload conditions.
• Set a zero position and use the digital display for rough positioning (0.1" resolution).
• Rapid for table and cross is 80 ipm / 2032 mm/min. (5 pitch lead screw); knee 40 ipm / 1016 mm/min. (10 pitch lead screw).
• Variable feed rate for table and cross is 0.1-50 ipm / 2.5-1270 mm/min.; knee maximum 25 ipm / 635 mm/min.
• Feed rate ramps from 0 to 50 ipm in 4 seconds.
• Digital feed rate control lets you select exact feed rates (0.1 ipm resolution.). Smooth finish at feeds as low as 0.2 ipm.
• Electronic-assist when used with muscle power.
• Fluid-resistant design.
• Electrical: 110 VAC, 50/60 Hz, 6 amps.
• Approximate weight: 13 lb. (without mounting hardware)

At ACU-RITE we took a different approach in developing our complete family of application-specific readout systems. We surveyed thousands of end-users to learn exactly how you use readout systems and why. We learned that you wanted a family of application-specific readout systems that provides you with greater flexibility, increased productivity, easy feature access, better accuracy and improved workpiece quality. We applied what we learned and put your wants and needs first. The result...ACU-RITE's complete family of operator-friendly readout systems...the new DRO 100, DRO 200 and VRO 300 series. These new readouts combined with the all new ENC 150 and other ACU-RITE precision glass scales have once again set the standard for readout systems. Backed by a comprehensive three-year Warranty, ACU-RITE readout systems were designed and are manufactured in the United States at ACU-RITE's ISO-9001 registered facility, with worldwide support provided by a factory-trained and certified distribution network.

> Readout Systems MICRO-LINE™ M MICRO-LINE™ T DRO 100 DRO 200M DRO 200T DRO 200G DRO 200E VRO 300M VRO 300T

Glass scale technology is the industry standard and is preferred worldwide for position feedback.  For nearly four decades, ACU-RITE's precision glass scale technology has proven its superior reliability through consistent accuracy and durability. Glass is an inherently stable material that resists changes in size, shape or density due to variations in temperature or humidity.  This stability allows for the generation of numerous ultra-fine line patterns; providing ACU-RITE precision glass scales with exceptional accuracy down to ±1.5µm (.00006"). ACU-RITE scales are available in travel lengths from 1"-773" and in resolutions from 0.5µm (.00002") to 10µm (.0005").

> Precision Glass Scales MicroScale ENC 150 ENC 250 Linear Encoder AR-10 PLUS BASIC MicroScales BASIC Multipliers